Conveyor Lubricants : High Temp Lubricants

Good All-Around General Lubricant.
Click Here for Technical Data Sheet

Similar to TYPE ML, but has no solid film additives. TYPE ML-L uses an ester base, resulting in a much clearer and cleaner lubricant. It works great in applications requiring a lubricant without solid film additives.
Click Here for Technical Data Sheet

Higher flash point provides a slightly more stable, longer lasting lubricant.
Click Here for Technical Data Sheet

Higher Viscosity means slower evaporation allowing penetration at higher temperatures.
Click Here for Technical Data Sheet

Formulated for the coating industry.
High lubricity with excellent paint and powder compatibility.
Water dispersion qualities make it ideal on washes, where moisture is a problem.
Click Here for Technical Data Sheet

Specially designed to reduce and remove particles left from other lubricants or oils on the conveyor. Can run through an oven in temperatures up to 550°F
Click Here for Technical Data Sheet

A pure synthetic formulated to withstand the most extreme industrial conveyor applications. TYPE SYN consists of a base fluid that acts as a cleaner, penetrate, and carrier providing a pathway for the other compontents to reach the wear points. TYPE SYN also has a very high flash point.
Click Here for Technical Data Sheet

Excellent mechanical stability with complete rust protection.
Exceptionally low volatility attributed to the high-boiling esters.
Extreme Pressure properties, typically 55 pounds on the Timken OK Load Test.
Click Here for Technical Data Sheet